· Product:Fractional CO2 Laser Machine
· Model Number: HBR60
· Description: Laser Type
· CO2 Wavelength: 10600nm
· Beam Delivery 7-joint arm Maximum
· Output Power: 15W/30W/40W
· Optical Beam Quality TEM Spot Size 0.12-1.25mm (Adjustable)
· Power of the Aiming Beam ＜5mW
· Aiming Beam 635nm
· Scanning Mode Randomized Scanning
· Laser Operating Mode UltraPulse fractional/normal Cooling Air Cooling
· Pulse Energy 10mj~200mj (every stepping:2mj)
· Spot Pattern Triangle/Square/Rectangle/Rhombus
· Pulse Interval 1ms~100ms (every stepping:1mj)
· Scan Area 10mmx10mm,20mmx20mm,30mmx30mm
· Working Mode Continuous operation
· Spot Density 36 spots/cm,144 spots/cm,576spots/cm,with intermittent loading
· Power Supply AC 220V 50Hz/AC 110V 60Hz
· Net Weight 45KGS Gross Weight 60KGS
· Dimensions (after packaged) 760mmx455mmx975mm
CO2 Fractional Laser beauty equipment Treatment Theory Fractional laser light penetrates the skin with tiny thermal channels through the random scanning,
creating an ablative and thermal effecton only channels (a micro-injury) without damaging the surrounding tissue.
The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing.
As collagen remodels, skin tightened, scars improved and pigmented lesions removed.
Application
1.Application Range of Fractional treatment handpiece a.Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks. b.Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid; c.Reconstruction of photoaging skin.
2.Application Range of Incision Handpiece a.Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery b.In cosmetic surgery,
it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
HBR60 Advantages
Two modes of laser energy output are selective: UltraPulse Fractional and normal modes
lAdopt COHERENT RF.excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type,
lesion parts and effectiveness requirement of different patients.Various spot volumes are suitable for different area of the body which maximally
avoid the side.effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests unique request.
8.4 TFT touch LCD, Reserved entry access for laser room ensures a safe treatment,Comparing with existing traditional CO2 Sealed Glass Laser,
RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership.
Parameter
Laser Type CO2 Wavelength 10600nm Beam Delivery 7-joint arm Maximum
Output Power: 15W/30W/40W
Optical Beam Quality TEM Spot Size 0.12-1.25mm (Adjustable)
Power of the Aiming Beam ＜5mW
Aiming Beam 635nm Scanning Mode Randomized
Scanning Laser Operating Mode UltraPulse fractional/normal Cooling Air Cooling
Pulse Energy 10mj~200mj (every stepping:2mj)
Spot Pattern Triangle/Square/Rectangle/Rhombus Pulse Interval 1ms~100ms (every stepping:1mj)
Scan Area 10mmx10mm,20mmx20mm,30mmx30mm
Working Mode Continuous operation Spot Density 36 spots/cm,144 spots/cm,576spots/cm,with intermittent loading
Power Supply AC 220V 50Hz/AC 110V 60Hz
Net Weight 45KGS
Gross Weight 60KGS
Dimensions (after packaged) 760mmx455mmx975mm
|
|
Fractional CO2 Laser Machine Images
|
